Matek Flight Controller F405-OSD

Matek  Flight Controller F405-OSD
Matek  Flight Controller F405-OSD
Brand: Matek
Product Code: F405-OSD
Availability: In Stock
Price: USD$29.99
Qty:     - OR -   Add to Wish List
Add to Compare
This product has a maximum quantity of 10
0 reviews  0 reviews  |  Please Login To Review This Product

Specifications

  • MCU: 168MHz STM32F405
  • IMU: 32K ICM20602 accelerometer/gyro (SPI)
  • Support 32K Gyro update & 16K PID Loop
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • Support SoftSerial on S5 & S6
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-6S option)
  • BEC 5V & 10V: No (FCHUB-6S option)
  • LDO 3.3V: Max.300mA for Spektrum RX
  • Spektrum BIND_PIN: RX4
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • 2x LEDs for FC STATUS (Blue, Red)
  • 6x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S connection

Included

  • 36x36mm PCB with 30.5mm mounting holes
  • 1x 0.5mm*16Pin 5cm Flexible Flat Cable
  • 4pcs M3 Anti-vibration Standoffs

 



No.1. Enable SoftSerial_TX on S5 or S6 pad

  • Don’t need to break the RX cover. Use the inverted TLM signal on the socket.
  • Type “resource motor 5 none” in CLI, ENTER,
  • Type “resource serial_tx 11 A15” in CLI, ENTER
  • Type “Save”, ENTER
  • Connect the inverted telemetry signal to S5 pad

F405-OSD_TLM2

 

Write a review

Please Login To Review This Product

Rotorgeeks © 2018
View Mobile / Standard